Compatible Products
Gallagher does not test, endorse, re-sell or provide technical support for third-party developed interfaces. This information has been supplied by the third party developers and all enquiries, including version compatibility, should be made directly to the contacts listed. Please refer to the Limitation of Liability. If the interface you are looking for is not featured, please contact Gallagher for more information about our Professional Services. If you have developed an interface to the Gallagher system that you wish to promote, please tell us by filling in the Compatible Products form.
Wirefree Access Control: Aperio
System brand: Aperio (by ASSA ABLOY)
Integration name: Aperio
Interface software developed by: Gallagher
Gallagher software versions interfaced to: v6.02
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
The high-level integration between Gallagher and Aperio online readers delivers cost-effective, electronic, wirefree access control. It’s an ideal alternative to keyed doors for customers that require some level of security but cannot justify the cost of a fully wired and monitored door, or customers who do not require door status monitoring or access mode changes.
Data on Card and Wirefree Access Control: SALTO
System brand: SALTO
Integration name: Data on Card and Wirefree Access Control
Software version: v8.3.1.84
Interface developed by: Gallagher
Gallagher software versions interfaced to: v5.21, 6.01, 6.10, 7.00
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
SALTO offline readers, when integrated with Gallagher, offer cost-effective, electronic access control for doors that require some level of security but without either real-time monitoring or frequent access mode changes.
Biometric: Morpho
System brand: Morpho
Product name: Morpho
Interface developed by: Gallagher
Gallagher software versions interfaced to: v6.01, 6.10, 7.00
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
The integration of Gallagher and Morpho fingerprint readers delivers a fully integrated biometric access control solution. The readers (including the new Morpho MA500+ range) offer seamless fingerprint enrolment and template management from within the Gallagher system user interface, reflecting immediate schedule and access group changes in the Gallagher system. Only the relevant fingerprint templates are sent to each reader, saving database space and cost.
For a complete solution, advanced Gallagher functionality, including Anti-passback, Duress Fingers, Dual Authorisation, Zone Counting, Interlocking Doors and Controlled Challenge, are available with Morpho readers.
Biometric: Fingerprint Authentication for E-Signatures
System brand: Morpho
Product name: Morpho
Interface developed by: Epicenter Group, Inc
Software version of middleware: 0.01a
Gallagher software versions interfaced to: v5.21
Gallagher API used to develop this interface: Controller API
Contact: Chris Rakowitz chris@theepicentergroup.com www.theepicentergroup.com
Available and supported: USA, rolling out globally in 2011
Industry applications: All
Biometric fingerprint authentication for e-signatures using Morpho MSO300 fingerprint enrollment device.
Long-range Readers: Nedap
Product Category: Long-range Readers
System brand: Nedap
Product name: Nedap Automatic Vehicle Identification (AVI)
Interface developed by: Gallagher
Gallagher software versions interfaced to: v5.02, 5.10, 5.20, 5.2, 6.01, 6.10, 7.00
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Nedap’s Gallagher-enabled, long-range Automatic Vehicle Identification system enables driver and vehicle ID and access control to be managed and monitored via Gallagher Command Centre. Features include:
• Integration of Gallagher personnel access cards (125 kHz or Mifare)
• Read range up to 10 metres / 33 feet
• Object speed up to 200km/h / 125mph
• Adjustable read range shape and distance.
Driver-based AVI tags deliver fast, convenient and secure vehicle access for authorised drivers and ensure that vehicles can’t leave or access a secure area without an authorised driver.
Card Printers: Datacard SP55
System brand: Datacard
Product name: Datacard SP55
Software version: Please contact Gallagher for information
Interface developed by: Gallagher, using the SCR-331 Mifare Module
Gallagher software versions interfaced to: Please contact Gallagher for this information
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Features:
| Printing | Duplex | Magstripe | Mifare Classic | Mifare Plus Card Encoding |
| Yes | No | Yes | Yes | No |
Card Printers: Datacard SP75
System brand: Datacard
Product name: Datacard SP75
Software version: Please contact Gallagher for this information
Interface developed by: Gallagher, using the SCR-331 Mifare Module
Gallagher software versions interfaced to: Please contact Gallagher for this information
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Features:
| Printing | Duplex | Magstripe | Mifare Classic | Mifare Plus Card Encoding |
| Yes | Yes | Yes | Yes | No |
Card Printers: Datacard CP60
System brand: Datacard
Product name: Datacard CP60
Software version: Driver: v2.1.63, Firmware: v13.27, Encoder.ini parameters: [CP Printer], Mifare = DCSP55Mifare.dll, Magstripe = DCSP55Mifrare.dll
Interface developed by: Gallagher
Gallagher software versions interfaced to: Please contact Gallagher for this information
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Features:
| Printing | Duplex | Magstripe | Mifare Classic | Mifare Plus Card Encoding |
| Yes | No | Yes | Yes | No |
Card Printers: Datacard CP80
System brand: Datacard
Product name: Datacard CP80
Software version: Please contact Gallagher for this information
Interface developed by: Gallagher
Gallagher software versions interfaced to: Please contact Gallagher for this information
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Features:
| Printing | Duplex | Magstripe | Mifare Classic | Mifare Plus Card Encoding |
| Yes | Yes | Yes | Yes | No |
.
Card Printers: Datacard CP80 Plus
System brand: Datacard
Product name: Datacard CP80 Plus
Software version: Please contact Gallagher for this information
Interface developed by: Gallagher
Gallagher software versions interfaced to: Please contact Gallagher for this information
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Features:
| Printing | Duplex | Magstripe | Mifare Classic | Mifare DESFire | Mifare Plus Card Encoding |
| Yes | Yes | Yes | Yes | Yes | No |
Card Printers: EDIsecure XiD440
System brand: EDIsecure
Product name: EDIsecure XiD440
Software version: Please contact Gallagher for this information
Interface developed by: Gallagher
Gallagher software versions interfaced to: Please contact Gallagher for this information
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Features:
| Printing | Duplex | Magstripe | Mifare Classic | Mifare Plus Card Encoding |
| Yes | Yes | No | Yes | No |
Card Printers: EDIsecure XiD580
System brand: EDIsecure
Product name: EDIsecure XiD580
Note: Requires Digion24Mifare Encoder
Interface developed by: Gallagher
Gallagher software versions interfaced to: Please contact Gallagher for this information
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Features:
| Printing | Duplex | Magstripe | Mifare Classic | Mifare Plus Card Encoding |
| Yes | Yes | Yes | Yes | No |
Card Printers: EDIsecure XiD8300
System brand: EDIsecure
Product name: EDIsecure XiD8300
Software version: Please contact Gallagher for this information
Interface developed by: Gallagher
Gallagher software versions interfaced to: Please contact Gallagher for this information
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Features:
| Printing | Duplex | Magstripe | Mifare Classic | Mifare Plus | Mifare Plus Card Encoding |
| Yes | Yes, requires flipper module | Yes | Yes | Yes | No |
Card Printers: Fargo DTC550
System brand: Fargo
Product name: Fargo DTC550
Software version: Please contact Gallagher for this information
Interface developed by: Gallagher
Gallagher software versions interfaced to: Please contact Gallagher for this information
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Features:
| Printing | Duplex | Magstripe | Mifare Classic | Mifare Plus Card Encoding |
| Yes | Yes | No | No | No |
.
Card Printers: Fargo HDP600
System brand: Fargo
Product name: Fargo HDP600
Software version: Please contact Gallagher for this information
Interface developed by: Gallagher
Gallagher software versions interfaced to: Please contact Gallagher for this information
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Features:
| Printing | Duplex | Magstripe | Mifare Classic | Mifare Plus Card Encoding |
| Yes | Yes | No | No | No |
.
Card Printers: Fargo HDP5000
System brand: Fargo
Product name: Fargo HDP5000
Software version: Please contact Gallagher for this information
Interface developed by: Gallagher
Gallagher software versions interfaced to: Command Centre v5.10 or later / Omnikey Encoder 1.1.16B
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Features:
| Printing | Duplex | Magstripe | Mifare Classic | Mifare Plus Card Encoding |
| Yes | Yes | Yes | Yes | No |
.
Card Printers: Nisca C101
System brand: Nisca
Product name: Nisca C101
Software version: Please contact Gallagher for this information
Interface developed by: Gallagher
Gallagher software versions interfaced to: Please contact Gallagher for this information
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Features:
| Printing | Duplex | Magstripe | Mifare Classic | Mifare Plus Card Encoding |
| Yes | No | No | No | No |
.
Card Printers: Nisca
System brand: NiSCA
Product name: NiSCA MIFARE Encoding
Software version: dependent on the NiscaSDK_432.exe – (see below)
Interface developed by: Gallagher
Gallagher software versions interfaced to: v5.21
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Using NiSCA card printers with a Digion24 MIFARE encoder, NiSCA MIFARE Encoding Customisation encodes MIFARE sectors on cards from the Gallagher system. The integration supports single and double-sided printing and encoding of Gallagher MIFARE on the NiSCA printer (tested with the PR5350 printer). The following printers are also compatible with the SDK: PR5100, PR5200, PR5300 (SCSI), PR5310 (SCSI), PR5300 (USB), PR5310 (USB), PR53LE (USB), PR5350 (USB).
Card Printers: Zebra P110iM
System brand: Zebra
Product name: Zebra P110iM
Software version: Please contact Gallagher for this information
Interface developed by: Gallagher
Gallagher software versions interfaced to: Please contact Gallagher for this information
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Features:
| Printing | Duplex | Magstripe | Mifare Classic | Mifare Plus Card Encoding |
| Yes | No | Yes | No | No |
Card Printers: Zebra P310iM
System brand: Zebra
Product name: Zebra P310iM
Software version: Please contact Gallagher for this information
Interface developed by: Gallagher
Gallagher software versions interfaced to: Please contact Gallagher for this information
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Features:
| Printing | Duplex | Magstripe | Mifare Classic | Mifare Plus Card Encoding |
| Yes | No | Yes | No | No |
Card Printers: Zebra P330i
System brand: Zebra
Product name: Zebra P330i
Note: Requires Digion24 Mifare Encoder
Interface developed by: Gallagher
Gallagher software versions interfaced to: Please contact Gallagher for this information
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Features:
| Printing | Duplex | Magstripe | Mifare Classic | Mifare Plus Card Encoding |
| Yes | No | Yes | Yes | No |
Card Printers: Zebra P330iM
System brand: Zebra
Product name: Zebra P330iM
Software version: Please contact Gallagher for this information
Interface developed by: Gallagher
Gallagher software versions interfaced to: v5.10 or later, please contact Gallagher for further information
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Features:
| Printing | Duplex | Magstripe | Mifare Classic | Mifare Plus Card Encoding |
| Yes | No | Yes | No | No |
Car Park Management – Cashless Charging System
System brand: MoTime
Product name: MoTime
Interface developed by: FlexTime
Software version: 1.0
Gallagher software versions interfaced to: v5.02, 5.10, 5.20, 5.21, 6.01
Gallagher API used to develop this interface: Direct Database
Contact: Ciaran Rowsome – ciaran.rowsome@flextime.ie,
Available and supported: Europe
Industry applications: All
The MoTime cashless car park charging system offers simplicity and efficiency. Employees use the Gallagher readers at car parks, the data is transferred from the Gallagher server to FlexTime’s MoTime software and the car park charge is automatically deducted from their salary. No cash or machine support charges required, no security firm is needed to collect cash and the car park is a safer environment, especially at night.
Duress Alarms: Security Escort Interface
System brand: Security Escort Interface
Product name: Bosch Security Escort
Software version: Security Escort v2.07
Interface developed by: Gallagher
Gallagher software versions interfaced to: v6.01
Gallagher API used to develop the interface: Controller API
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
In the event of an emergency, a user signals for help using the Security Escort wireless help-call system and the user’s or asset’s name, description and location is raised via a network of transmitters, receivers and responders within the Gallagher Command Centre. Security personnel respond to the alarms via Gallagher alarms management, the alarms being displayed on a site plan and recorded in the database.
Electronic Key Cabinet: CIC Keysafe
System brand: CIC Keysafe
Product name: CIC Keysafe
Software version: KeySecure v1.2.5.0 and API V1001
Interface developed by: Gallagher
Gallagher software versions interfaced to: v5.20, 5.21, 6.01
Contact for this interface: Gallagher Business Development Manager
CIC Secure contact: info@cicsecure.com.au / sales@cicsecure.com.au www.cicsecure.com.au. Tel: +61 2 6239 3355
Available and supported: Worldwide
Industry applications: All
When a key is removed from a CIC Keysafe with keysafe alarms, the Gallagher Controller receives external card events. Cardholders can be denied exit through an external door until they return the key.
Electronic Key Cabinet: Morse Watchman
System brand: Morse Watchman
Product name: KeyWatcher
Model: KeyWatcher III
Software version: KWExchange 1.0
Interface developed by: Australian Security Technology P/L
Gallagher software versions interfaced to: v5.20, 5.21
Gallagher API used to develop the interface: Controller API
Contact for this interface: Jason Leach – jl@astpl.com.au, www.astpl.com.au
Available and supported: Worldwide
Industry applications: All
The KeyWatcher interface automatically extracts users’ details, card information and access group assignments and automatically uploads this information to KeyWatcher hardware. KeyWatcher hardware can send all the event transactions and alarms in real time back to the Gallagher software.
Elevator: Kone Polaris
System brand: KONE Polaris
Product name: KONE Polaris
Software version: KONE Group Controller Access Control Interface v1.5 Specification – Document 829394
Interface developed by: Gallagher
Gallagher software versions interfaced to: v5.20, 5.21, 6.01, 6.10, 7.00
Gallagher API used to develop the interface: Gallagher Elevator HLI
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Control access to floors with the Gallagher Elevator High Level Interface (HLI) and a Gallagher reader installed in the elevator car. When using the Gallagher HLI, this is achieved without the heavy I/O usage of a low level interface. Full access control is achieved via the Gallagher destination-based dispatching HLI which allows the elevator system to group passengers travelling to similar destinations.
Elevator: Kone
System brand: KONE
Product name: KONE (standard)
Software version: EPL HLI Security Protocol v2.3 Enhancement
Interface developed by: Gallagher
Gallagher software versions interfaced to: v5.20, 5.21, 6.01, 6.10, 7.00
Gallagher API used to develop the interface: Gallagher Elevator HLI
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Control access to floors with the Gallagher Elevator High Level Interface (HLI) and a Gallagher reader installed in the elevator car. When using the Gallagher HLI, this is achieved without the heavy I/O usage of a low level interface.
Elevator: Otis
Product name: Otis (Standard)
Software version: Specification for EMS – Security/BMS Protocol, OTIS ref: 51646B
Interface developed by: Gallagher
Gallagher software versions interfaced to: v5.20, 5.21, 6.01, 6.10, 7.00
Gallagher API used to develop the interface: Gallagher Elevator HLI
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Control access to floors with the Gallagher Elevator High Level Interface (HLI) and a Gallagher reader installed in the elevator car. When using the Gallagher HLI, this is achieved without the heavy I/O usage of a low level interface.
Elevator: Otis Compass DCS
System brand: Otis
Product name: Otis Compass DCS
Software version: Compass Security Integration software requirements. Specification - Document # D125_SRS_CSIGeneric
Interface developed by: Gallagher
Gallagher software versions interfaced to: v5.20, 5.21, 6.01, 6.02, 6.10, 7.00
Gallagher API used to develop the interface: Gallagher Elevator HLI
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Passengers can be grouped by the elevator system according to their destination for more efficient access control by using the Gallagher destination-based dispatching HLI.
Elevator: Schlindler
System brand: Schlindler
Product name: Schindler Miconic
Software version: SchindlerID v1.1.296
Interface developed by: Gallagher
Gallagher software versions interfaced to: v5.20, 5.21, 6.01
Gallagher API used to develop the interface: Gallagher Elevator HLI
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
With Schindler Miconic HLI and Gallagher, elevator usage can be tailor-made for individual employees allowing them access to certain floors during specific time periods. It is controlled by a user template held in a personal data field (PDF) and synchronised between the Gallagher Command Centre and Schindler Miconic server via a middleware PC on any server on the TCP/IP network. Multiple elevator systems can be interfaced with Gallagher, each with unique user templates. When changes to cardholder information related to elevator access is changed in Gallagher, update messages are automatically sent to the Schindler system in real time.
Elevator: ThyssenKrupp
System brand: ThyssenKrupp
Product name: ThyssenKrupp
Software version: Protocol support: a simple serial adaption of card reader systems to lift control system from TKAW v1.0
Interface developed by: Gallagher
Gallagher software versions interfaced to: v6.02, 6.10, 7.00
Gallagher API used to develop the interface: Gallagher Elevator HLI
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Controlling access to secure floors, the ThyssenKrupp Elevator Group Controller allows access privileges held within the Gallagher Command Centre to be communicated via an RS232 serial communications link to the ThyssenKrupp elevator system. All the cardholder needs to do is present their card at a Gallagher reader near to a ThyssenKrupp Destination Selection Control (DSC) and this will direct them to the appropriate elevator for the required (valid) floor.
Fuel Pump: Gallagher
System brand: Gallagher
Product name: Fuel Pump Integration
Software version: PEC Pump Communication Protocol
Interface developed by: Gallagher
Gallagher software versions interfaced to: v6.10
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
This fuel pump integration is for the PEC Pump Communication Protocol. This integration provides the ability to:
- Enforce either single or dual cardholder authorisation before a fuel pump can be used to dispense fuel.
- Configure the maximum quantity of fuel that should be dispensed to a cardholder during a single pump visit.
- Enforce the collection of the vehicle’s odometer reading before a fuel pump can be used to dispense fuel.
- Report how much fuel has been taken by a cardholder (Cardholder Activity Report).
- Note: A more comprehensive reporting (optional) feature (Fast Reports) can enable reporting of fuel volumes delivered to each cardholder over a nominated time period.
- Obtain dual authorisation via one or two nominated readers.
- Authorise a fuel pump from a Gallagher Command Centre workstation PC.
Handheld Reader: Sec Eng Systems
System brand: Sec Eng Systems
Product name: SED-901 Black Water Series Wireless Access Control
Model: SEC-901-R and SEC-901-H
Gallagher software versions interfaced to: v5.10, 5.20, 5.21, 6.01, 6.02, 6.10
Gallagher API used to develop the interface: Controller API
Contact for this interface: Jeffrey Tonazzi – sales@seceng.com.au
Countries supported: Manufactured in Australia. Distributed in Australia and NZ. Has been also been despatched and installed throughout Asia and the Pacific, including Thailand, Indonesia, New Caledonia and New Guinea
Industry applications: Defence, education, government (state, federal, embassies), health, mining, transportation (ports, airports, rail etc), utilities (power, water etc)
The latest generation Sec Eng SED-901 wireless handheld card reader is ideal when points are impossible or costly to reach by cable. The remote/master system is simple to install and set up and can be expanded to suit your requirements or site demands. The SED-901 series can multi-cluster up to 15 SED- 901 handheld units in one area with an operational range of up to 500m. The SED-901 Black Water series is compatible with Wiegand 20 to 80 bit and Gallagher 125 kHz and MIFARE class card reader formats. Applications include boom gates, doors, vehicles, fork lifts, elevators and gates.
Imaging: Aimetis
System brand: Aimetis
Product name: Aimetis Symphony
Developed by: Aimetis Corp
Software version: 2 November 2011
Gallagher software versions interfaced to: v6.10
Gallagher API used to develop the interface: Direct Database Interface, OPC Alarms and Events Interface
Contact for this interface: Sales Department – sales@aimetis.com, Ph +1 519 746 8888
Available and supported: Worldwide
Industry applications: All vertical markets, banking and finance, defence, education, entertainment (stadiums, casinos etc), general commercial, government – local community, state/federal/embassies, health, law enforcement (police, courts etc), manufacturing, mining, retail, telecommunications, transportation (ports, airports, rail etc), utilities (power, water etc)
The Gallagher system notifies Aimetis Symphony, a video management system, of alarms and events which the Aimetis interface then integrates within its own activities system. Aimetis Symphony will also message users to inform them that a Gallagher alarm/event has taken place.
Imaging: Avigilon
System brand: Avigilon
Product name: Control Center
Software version: 4.10.0.24
Software middleware version:
Interface developed by: Avigilon Corporation
Gallagher software versions interfaced to: v5.21, 6.10, 7.00
Gallagher API used to develop the interface: Controller API, DVR Interface
Contact for this interface: Avigilon Tech Support support@avigilon.com www.avigilon.com. Tel: +1 888 281 5182
Available and supported: Worldwide
Industry applications: All
Events and alarms from the Gallagher system can be forwarded to the Avigilon Control Center by the Avigilon Control Center / Gallagher Integration module. Videos and events can also be fed into the Gallagher system by the Avigilon Control Center.
Imaging: Bosch
System brand: Bosch
Product name: Bosch
Software version: Bosch Video Management System using SDK v4.43.04.03 (Tested with Bosch BRS system and DiBos 8 series equipment)
Interface developed by: Gallagher
Gallagher software versions interfaced to: v7.00
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Gallagher Command Centre supports video interfaces and a high level event and alarm interface with the Bosch DVR system, featuring the following:
- Recorded video from multiple cameras can be associated with alarms and is available for playback in Command Centre Classic or Premier alarm viewers.
- Live video viewer and controls are available directly from Command Centre Classic or from Command Centre Premier.
- Selected high level events and alarms sent from the Gallagher Controller to the Bosch system can trigger moving a camera to a given preset.
- High level events and alarms, such as motion detection or diagnostic alarms, can be sent from the Bosch system for management within Gallagher Command Centre.
- Live display of video in response to Challenge events within Command Centre Classic or Premier.
- The ability to monitor and control relays on Bosch devices from Command Centre.
Imaging: Dedicated Micros
System brand: Dedicated Micros
Product name: Dedicated Micros
Software version: DV-IP 04.3 (32.05)
Interface developed by: Gallagher
Gallagher software versions interfaced to: v6.01, 6.02, 6.10, 7.00
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
The Dedicated Micros DVR integration was developed for NetVu-supported DVRs and supports the live viewer functionality. As with all standard live viewer functionality, live images can be used as part of the Challenge Viewer, Site Plans, External systems window and the Find tool. Other features are Pan Tilt and Zoom controls, sending cameras to presets and initiating patterns.
Operators can also view any alarm with video footage in the alarm viewer. Historical video associated with configured alarms and events can be retrieved via the Find tool. The operator can also play/pause, fast-forward/rewind or advance frame by frame during viewing.
Imaging: DVIS
System brand: DVIS
Product name: DAVIS
Software version: DAVIS v2.9.5
Software middle version: DAVIS v2.9.5
Interface developed by: Data Video Interactive Solutions Pty Ltd (DVIS)
Gallagher software versions interfaced to: v5.20, 5.21
Gallagher API used to develop the interface: Controller API, Direct Database Interface, DVR Interface, OPC Alarms & Events Interface, OPC Data Access Interface
Contact for this interface: Tina Chang – tina@dvis.com.au www.dvis.com.au
Available and supported: Australia
Industry applications: All
The Gallagher system triggers DAVIS system action for events and alarm through the OPC bridge.
Imaging: DVTel
System brand: DVTel
Product name: DVTel Latitude NVIS v5.3
Software version: DVTel Latitude NVIS v5.3 SP1, 6.0 running on Windows XP
Interface developed by: Gallagher and DVTel
Gallagher software versions interfaced to: v5.20, 5.21, 6.01, 6.10
Gallagher API used to develop the interface: Controller API, DVR Interface
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
This allows DVTel DVR recorded video to be associated with alarms and allows DVR video viewer control in the Gallagher Command Centre. Events and alarms can be shared bi-directionally between the two systems.
Imaging: exacqVision Video Management System (VMS)
software System brand: exacqVision Video Management System (VMS)
Product name: exacqVision Pro and Enterprise editions
Model: All versions of software/hardware platforms
Software version: v3.5 and above
Interface developed by: Zone Advanced Protections Systems
Gallagher software versions interfaced to: v5.21
Gallagher API used to develop the interface: DVR Interface
Contact for this interface: Jaques Van Zyl – jaquesv@zoneaps.com.au http://exacq.com/support/access-control.html. Tel: +61 2 9634 9700
Available and supported: Supported/developed in Australia. Available worldwide
Industry applications: General commercial, government (local and state), health, law, mining and others
Imaging: Genetec Omnicast
System brand: Genetec Omnicast
Product name: Genetec Omnicast IP Vide Surveillance System
Software versions: 4.0 and above
Interface developed by: Open Platform Systems
Gallagher software versions interfaced to: v5.20, 5.21, 6.01, 6.10
Gallagher API used to develop the interface: Controller API and DVR Interface
Contact for this interface: Kobi Ben-Shabat – kobi@opsystems.com.au www.opsystems.com.au Tel: +61 3 9646 9004
Available and supported: Australia
Industry applications: Education, entertainment (stadiums, casinos etc), general commercial, telecommunications, transport (ports, airports, rail etc), utilities (power, water etc)
Omnicast Gallagher Interface
This interface uses the Gallagher Event Input API to allow a single Gallagher Command Centre system to be interfaced with one or more Genetec Omnicast directories so that events and alarms can be sent between the two systems.
Omnicast DVR Integration
When installed on Gallagher Command Centre workstations, this software allows for the viewing of live and recorded video from within Gallagher. This includes full PTZ control (including presets, patterns and outputs) and support for two-way audio communication.
Imaging: Geutebruck
System brand: Geutebruck
Product name: GeViScope Software, all models
Interface developed by: Geutebruck
Software version: All
Gallagher software versions interfaced to: v5.21, 6.01, 6.10, 7.00
Gallagher API used to develop the interface: Controller API
Contact for this interface: Alan Johnson – alan.johnson@geutebruck.com.au. sales@geutebruck.com.au. Tel: +61 7 3622 6400
Available and supported: Worldwide
Industry applications: All vertical markets, banking and finance, defence, education, entertainment (stadiums, casinos etc), general commercial, government – local and state/federal/embassies, health, law enforcement (police, courts etc), manufacturing, mining, retail, telecommunications, transportation (ports, airports, rail etc), utilities (power, water etc) and corrections
This interface offers a complete solution which delivers enhanced entry authentication, security alarm management, event management, OH&S and compliance/tracking. Vital information can be streamed from one system to ensure that all critical events and alarms are recorded and acted on. The operator simply uses the Gallagher Command Centre as the main control, which then provides fast and efficient responses for high security sites. Operational costs such as training, number of staff, alarm and event management are reduced and it also increases productivity by delivering faster response times.
Advanced key features include:
• Bi-directional alarm management
• Bi-directional event management
• Bi-directional tracking
• Enhanced entry control for anti-passback, tailgating, facial recognition and dual authority
• Enhanced external perimeter detection using Geutebruck’s world-class analytics and Gallagher Trophy FT perimeter fence system.
Two interfaces were created for simple installation and integration:
• The Gallagher View Interface: provides operators with key video alarm and events into the Gallagher Command Centre Alarm Manager
• The Gallagher High Level Interface (HLI): provides high level bi-directional interface between the Geutebruck GeViScope Software and the Gallagher Command Centre.
Imaging: IndigoVision
System brand: IndigoVision
Product name: SMS4
Software version: SMS4 r3 sp2
Software middleware version: IndigoVision Gallagher Integration Module v2.0
Interface developed by: IndigoVision
Gallagher software versions interfaced to: v5.01, 5.10, 5.20, 5.21
Gallagher API used to develop the interface: OPC Alarms and Events Interface, OPC Data Access Interface
Contact for this interface: Ian Farrell – i.farrell@indigovision.com. IndigoVision
Available and supported: Worldwide
Industry applications: All
Limitation of Liability
The IndigoVision Gallagher Integration Module allows events and alarms from Gallagher systems to be forwarded to IndigoVision IP Video and Alarm Management systems. The result is a tightly integrated access control and CCTV system.
Any Gallagher event can trigger a wide range of actions within the IndigoVision system – from starting recordings on an IndigoVision Network Video Recorder to moving PTZ cameras to specific locations or sending notification emails.
All Gallagher events appear within the IndigoVision Alarm Log which can be viewed in playback in the Control Center.
The module is compatible with any version of Gallagher with the Gallagher OPC Bridge interface installed on the same machine. Powerful and flexible configuration is carried out via simple text files and the OPC Bridge configuration utility.
Imaging: Intellex Ultra
System brand: Intellex Ultra (by American Dynamics)
Product name: Intellex Ultra
Software version: Intellex API v4.1, 4.20.20.84
Interface developed by: Gallagher
Gallagher software versions interfaced to: v6.02
Gallagher API used to develop the interface: DVR Interface
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
A high level interface with the Intellex DVR (American Dynamics) integration includes the standard live viewer functionality. This allows the operator to view live footage initiated from the Challenge Viewer, Site Plans, External systems window and the Find tool. The interface supports:
• Recorded DVR video to be associated with alarms in the Command Centre
• Video viewer control from the Command Centre user interface for viewing live and stored video footage, including the use of play/pause, fast-forward and rewind features. Operators can view any alarm with video footage in the Alarm Viewer and retrieve historical video associated with configured alarms and events via the Find tool
• Live video display in the Challenge window.
Alarms and events are also shared between Gallagher and Intellex via a bi-directional alarm interface. Gallagher will start or stop recording according to Gallagher alarms or events and will also initiate recording on Intellex alarms such as motion detection and other diagnostic type events such as video loss.
Note: Pan Tilt Zoom, presets and patterns are not supported.
Imaging: Milestone Systems A/S
System brand: Milestone Systems A/S
Product name: XProtect Corporate, XProtect Enterprise, XProtect Professional, XProtect Express
Interface developed by: Milestone Systems A/S
Software version: XPCO version 4.0 and 4.1, XPE and XPP version 8.0, XPEX 1.0
Gallagher software versions interfaced to: v6.02, 6.02, 6.10
Gallagher API used to develop the interface: DVR Interface
Contact for this interface: purchase@milestonesys.com. Milestone Systems solutions
Available and supported: Worldwide
Industry applications: All
This integration allows for the viewing of live and playback video footage from Milestone recorders within Gallagher Command Centre and offers event exchange between the two systems.
The Milestone Remote Client also serves for more advanced video management, including PTZ and audio in/out. Gallagher events can be used to trigger, for example, PTZ camera positions and start recording in Milestone.
Milestone events such as video motion detection and camera tampering can be relayed to the Gallagher system for further processing.
The three solutions for event link integration are:
• Invoking a Milestone Active X within the Gallagher workstation (live and playback)
• Invoking the Milestone Remote Client from the Gallagher workstation (enabling configuration of more complex views, PTZ, audio in/out, timeline etc)
• Event link – exchange of events between the two systems using the Gallagher Controller interface. For example, sending motion detection or video events to Gallagher or sending events from Gallagher to Milestone.
Imaging: NUUO
System brand: NUUO
Product name: NUUO DVR, NVR (IP+)
Model: SCB-IP+, SCB-7000 series, SCB-6000 series, SCB-3000 series
Interface developed by: NUUO
Software version: v3.5.0
Middle software version: v1.0
Gallagher software versions interfaced to: v6.02, 6.10
Gallagher API used to develop the interface: DVR Interface
Contact for this interface: Graham Goldridge – graham@nuuo.com. www.nuuo.com
Industry applications: All
You can stream live videos from NUUO recording servers with PTZ control. It supports playback of recorded video associated with a Gallagher event. Multiple NUUO recording servers can be integrated into Gallagher software.
Imaging: Panasonic
System brand: Panasonic
Product name: Panasonic I-pro
Interface developed by: Panasonic
Gallagher versions interfaced to: v6.02, 7.00
Gallagher API used to develop the interface: Gallagher Controller API, DVR Interface, OPC Access Interface, OPC Alarms, XML Interface
Contact: Jason Walsh – jason.walsh@nz.panasonic.com, http://panasonic.net/security
Available and supported:
Industry applications: Banking, Finance, Defense, Education, Entertainment, General Commercial, Government Local, Government State, Health,Law Enforcement, Manufacturing, Mining, Retail, Telecommunications, Transportation, Utilities
High Level Integration for Panasonic NVR/DVR.
Imaging: Pelco
System brand: Pelco
Product name: Pelco Endura
Software version: Pelco Endura v2.0, RTSP Version 1.2.1-729
Interface developed by: Gallagher
Gallagher versions interfaced to: v6.01
Gallagher API used to develop the interface: DVR Interface
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
• Allows Pelco DVR-recorded video to be associated with alarms in Gallagher Command Centre
• Allows DVR video viewer control from within Gallagher Command Centre
• High-level event and alarms interface with Pelco Endura DVR units
• Supports triggering of video tours or sending cameras to presets in response to events
Integration Platform: 7 Leaves
System brand: 7 Leaves
Product name: Seven Leaves Integration Platform (SLIP)
Interface developed by: 7 Leaves Technologies c.c.
Software version: v2.6
Gallagher versions interfaced to: v5.21
Gallagher API used to develop the interface: Controller API, Direct Database Interface, OPC Alarms and Events Interface, OPC Data Access Interface
Contact for this interface: Dale Wastell – dale@7leaves.co.za
Available and supported: Southern Africa
Industry applications: All
SLIP is a powerful integration / management tool which provides many interfaces to its functionality. The system can either have a visible user interface (such as asset tracking) or can run silently in the background providing integration without user intervention. Using its powerful rule engine, SLIP can be configured to perform almost any form of system customization and can seamlessly control any integrated system. For example, an event generated by system A can trigger an action on system B depending on a state in system C. For example, an access control card swipe can make a camera move but only if there is no fire alarm. The actions, conditions and events can be pulled from any integrated system. SLIP is being constantly expanded to include new systems.
Intercom: Jacques 650 Series
System brand: Jacques 650 Series VoIP Voice Communication System
Software version: v4.64
Interface developed by: Gallagher
Gallagher versions interfaced to: v7.01
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
The Jacques 650 Series VoIP Voice Communication System is a sophisticated and intelligent intercom and PA system which integrates directly with Gallagher via a high level interface. Its VoIP technology delivers a fully digital networked intercommunications and PA system. Six sub-systems are available which can either operate standalone or as part of a total integrated communications system:
• Professional intercom
• Multi-zone PA
• Digital message store
• Music distribution
• Information and entertainment
• Emergency help points.
Occupational Health and Safety (OH&S): Health and Safety Attendance TV Display
System brand: Health and Safety Attendance TV Display
Product name: H&S Panel
Software version: v1.0
Interface developed by: FlexTime
Gallagher versions interfaced to: v5.02, 5.10, 5.20, 5.21, 6.01
Gallagher API used to develop the interface: Direct Database Interface
Contact: Ciaran Rowsome – ciaran.rowsome@flextime.ie www.flextime.ie
Available and supported: Europe
Industry applications: All
A health and safety solution, TV screens display who is in the building at all times.
Occupational Health and Safety (OH&S): PSD Logistics
Product name: PSD Logistics
Software version: v6.x
Interface developed by: Professional Software Design Pty Ltd
Gallagher versions interfaced to: v5.02, 5.10, 5.20, 5.21, 6.01, 6.10
Gallagher API used to develop the interface: Controller API, Direct Database Interface, OPC Alarms and Events Interface, XML Interface
Contact for this interface: Michael Lekias – mickl@psdlogistics.com www.psdlogistics.com. www.psdesign.com.au
Available and supported: Worldwide
Industry applications: All
Features and benefits:
• Tag Boards: Live cardholder on-site displays. Locate workforce, contractors and visitors on site
• Shift Management: Manage shifts and identify non-attendance of your workforce
• Asset Management: Assign and track assets on site, including asset and cardholder usage reporting
• Fitness for Work: Random drug and alcohol testing, including re-testing and management plans
• Fatigue Management: Monitor fatigue-inducing situations, including too long on site and maximum days worked
• Intelligent Access Management: Advanced access management, including quarantine and over access rules
• Workforce Mobilisation Management: Manage workforce and contractor site access
• Site and Area Inductions: Set and monitor cardholder inductions, including expiry warning notifications
• Visitor Management: Assign and track visitors on site
• Timed Work Management: Monitor workers and be notified if they fail to report in
• Time on Site Reporting: Produce and customise timesheet reports for the workforce with the powerful and flexible SQL based report builder
• Automatic Reporting: Schedule any report to be automatically generated, emailed and exported in a variety of file formats
• Card Expiry Management: Monitor card expiry dates, including pre-emptive notifications.
Occupational Health and Safety (OH&S): RightCrowd
System Brand: RightCrowd
Product name: SureSite
Software version: v6.4
Interface developed by: RightCrowd Software Pty Ltd
Gallagher versions interfaced to: v5.02, 5.10, 5.20, 5.21, 6.01, 6.02, 6.10
Gallagher API used to develop the interface: OPC Alarms and Events Interface, OPC Data Access Interface, XML Interface
Contact for this interface: Darren Bain – darren.bain@rightcrowd.com www.rightcrowd.com/products.html
Available and supported: Worldwide
Industry applications: All
Compliance, safety and security software.
Perimeter Security: Gallagher Trophy FT
System brand: Gallagher
Product name: Trophy FT
Interface developed by: Gallagher
Gallagher versions interfaced to: v5.02, 5.10, 5.20, 5.21, 6.01, 6.10, 7.00
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
A high-level interface between Gallagher Command Centre and the Trophy FT perimeter security system delivers multi-site, multi-zone control and monitoring through a single graphical user interface. Configured and controlled through Gallagher Command Centre, the Trophy FT integration is believed to be a first in the world from a single manufacturer. Provides the option of expanding the system to also deliver fully integrated access control.
Perimeter Security: Senstar Stellar
System Brand: Senstar Stellar
Software version: Senstar 100 v6.20, running on the Senstar Stellar QNX OS v4.25L
Interface developed by: Gallagher
Gallagher versions interfaced to: v6.01
Contact: Gallagher Business Development Manager
Available and supported: Worldwide
Industry applications: All
Allows the Gallagher Controller to receive alarms from the Senstar-Stellar Senstar 100 perimeter security system. Perimeter alarms are passed through to the Gallagher Controller for acknowledgement and processing.
People Logistics and Rostering: Osmotion
System Brand: Osmotion
Product name: Osmotion
Software version: Osmotion SAM v5.337
Interface developed by: Osmotion Pty Ltd
Gallagher versions interfaced to: v5.02, 5.10, 5.20
Gallagher API used to develop the interface: OPC Alarms and Events Interface, OPC Data Access Interface
Contact for this interface: Chris Woods – chris@osmotion.com.au
Available and supported: Worldwide
Industry applications: Mining, oil and gas, construction
Osmotion SAM is a people logistics and rostering system for camp accommodation and travel management. It delivers reliable synchronised travel, accommodation and rosters, multi-site and multi-camp management, 100 per cent room utilisation, easy accounting and people tracking for safety and efficiency, with flexibility to meet your changing business requirements.
RFID Tracking: USM Nodetrol Platform
System Brand: USM Nodetrol Platform
Interface developed by: USM Systems, Ltd
Gallagher versions interfaced to: v5.02, 5.10, 5.20, 5.21
Gallagher API used to develop the interface: Controller API
Contact for this interface: Joseph Przygoda chet@usmsys.com or Scott Loney scottloney@usmsys.com – info@usmsys.com www.usmsys.com
Available and supported: Worldwide
Industry applications: Open architecture design and structure providing interface and utilization for all potential applications.
Interfaced with a Gallagher platform, the USMS Nodetrol Platform provides the following options and capabilities:
• Paired tagging which allows the ‘pairing’ of users/assets, users/users or a combination of tagged items or personnel regardless of supplier of such transactional input. For example, an employee with an employee HID access card (Gallagher) carrying an RFID tagged laptop (RFID supplier) approaches an egress point, but is not authorised to carry the laptop out of the facility. When that employee uses his/her access card to open a door, a separate RFID reader ‘sees’ that he is carrying an unauthorised device causing a signal to be sent to the Gallagher platform triggering an alarm status
• Integrated asset tracking and access control capability
• Fully supports directional RFID hardware and software modes. Provides a single directional ‘event’ to Gallagher through the gateway interface
• Allows use of any available reader technology including RFID, MagStripe, Keypad, HID ProxCard etc. Includes future technology protection with the addition of a simple driver to accommodate expanded systems
• Fully encrypted network communication using industry standard AES encryption
• Linux-based appliance provides highest level of reliability. Other supporting interface applications can be run on Windows, MAC OSX or Linux
• Real-time integration and interface with Gallagher
• Bi-directional capabilities between RFID system input and Gallagher
• Bi-directional local control capability out of RFID Controller from Gallagher commands
• Ability to easily map an RFID tag to a Gallagher cardholder
• Potential to have Gallagher card functionality and RFID tag functionality on a single card providing multiple function set of ID
• Ability to ‘read’ multiple personnel tags (RFID ID badges) and/or asset tags (attached to assets) as they pass through coverage areas and report information in real time for action.
Time and Attendance: VisionTime
System brand: VisionTime
Product name: VisionTime
Software version: v3.4, 4.0, 5.0
Interface developed by: FlexTime
Gallagher versions interfaced to: v5.02, 5.10, 5.20, 5.21, 6.01
Gallagher API used to develop the interface: Direct Database Interface
Contact: Ciaran Rowsome – ciaran.rowsome@flextime.ie www.flextime.ie
Available and supported: Europe
Industry applications: All
Access bookings at Gallagher readers/terminals are transferred to the Gallagher server and the VisionTime T&A system. This results in added value to the access system and reduces costs because there is no need to carry two cards or have separate time terminals installed.
Time and Attendance: Jarrison Time
System brand: Jarrison Time
Product name: Jarrison Time
Software version: v2.24 and higher
Interface developed by: Jarrison Systems
Gallagher versions interfaced to: v5.21, 6.01, 6.10, 7.00
Gallagher API used to develop the interface: Direct Database Interface
Contact: Jason Matthews – jason@jarrison.co.za www.jarrisontime.co.za
Available and supported: South Africa, Zambia, Namibia
Industry applications: All
Read from Gallagher database only and insert T/A transactions into the Jarrison Time database.
Time and Attendance: Thinking Software
System brand: Thinking Software
Product name: Horizon
Software version: N/A
Interface developed by: Thinking Software
Gallagher Command Centre versions interfaced to: v5.02, 5.10, 5.20, 5.21, 6.01, 6.02, 6.10, 7.00
Gallagher API used to develop the interface: Database Interface
Contact: Luke Broadhurst luke.broadhurst@thinking-software.com www.thinking-software.com
Available and supported: UK, USA, Middle East, Africa (any English speaking countries)
Industry applications: Entertainment, General Commercial, Government / State, Health, Manufacturing, Retail, Utilities, Construction
Horizon Time & Attendance uses the data from the Gallagher access control system to provide flexible, comprehensive, SQL-based:
- Time-Recording
- Staff Rostering
- Absence & Holiday Planning
- Payroll Linking, Cost Forecasting & Analysis
- Flexi-Time Management
- Qualifications & Competencies
- Demand-Based Staffing
- SMS Text Capability
- Self-Service Holiday Requests
- CO2 Impact Calculations
- Lightweight HR and more ...